What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVC90704CXAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVC90704CXAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACVC90704CXAB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ACVC90704CXAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2688
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2688 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is the genuine OEM flame-rectification rod for the Goodman ACVC90704CXAB 96% AFUE two-stage gas furnace. After ignition, the control board sends a small AC signal through this sensor; the flame conducts a tiny microamp DC current back to the board, proving the burner is lit. When the sensor oxidizes or cracks, the board can no longer confirm flame and shuts the gas valve within seconds — producing the classic symptom of a furnace that lights, runs briefly, then short-cycles or locks out with a no-heat call.

Specifications

Part type: Flame sensor / flame rectification rod
OEM part number: 0130F00010S
Compatible model: Goodman ACVC90704CXAB (and related ACVC/GMVC90 series)
Function: Proves burner flame to the integrated furnace control
Signal: Microamp DC flame-rectification current
Brand: Goodman (OEM)

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length, mounting bracket, and terminal so it sits at the precise flame position the burner was designed for — critical for a strong, stable microamp signal. Generic flame sensors often differ slightly in rod length or bracket angle, which can read a weak flame current and bring back the same short-cycling you are trying to fix. Genuine ensures a reliable signal and full board compatibility.

Installation Difficulty

Easy (2 of 5). Roughly 15–20 minutes. Turn off power and gas, remove the single mounting screw, disconnect the sensor lead, and install the 0130F00010S. Avoid touching the rod with bare fingers. Restore power and gas, then confirm a steady flame and proper microamp reading on startup.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACV...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVC90704CXAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVC90704CXAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVC90704CXAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu