What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVC801005CXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVC801005CXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACVC801005CXAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ACVC801005CXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2545
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2545 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor (flame rod) engineered for the Goodman ACVC801005CXAA gas furnace and compatible models. Positioned in the burner flame path, this sensor confirms the presence of a flame after ignition and signals the control board to keep the gas valve open. A dirty, corroded, or failed flame sensor is the single most common cause of a furnace that lights briefly and then shuts down (short cycling), making this an essential repair and maintenance part.

Specifications

OEM Part Number: 0130F00010S
Compatible Model: ACVC801005CXAA
Equipment Type: Gas Furnace
Function: Flame rectification / flame proving
Material: Heat-resistant Kanthal sensing rod with ceramic insulator
Brand: Goodman

OEM vs. Generic

This is a factory OEM Goodman component, manufactured to exact original specifications for guaranteed fit, rod length, and electrical response. Generic flame sensors may vary in mounting bracket geometry and rod position, which can cause weak or intermittent flame signal. For dependable performance on your ACVC801005CXAA, the OEM part removes the guesswork.

Install Difficulty

Easy (1/5). Replacement typically takes under 15 minutes with a single screwdriver. Always shut off power and gas to the furnace before servicing. Disconnect the sensor wire, remove the mounting screw, swap in the new sensor, and reconnect.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACV...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVC801005CXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVC801005CXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVC801005CXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu