What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACSS920402BNAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACSS920402BNAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACSS920402BNAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ACSS920402BNAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2366
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2366 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM ignition component built for the Goodman ACSS920402BNAA gas furnace and compatible models. The flame sensor uses flame-rectification to confirm the burners have lit; if it fails to detect flame, the control board shuts the gas valve for safety. A dirty or worn flame sensor is the #1 cause of furnaces that ignite briefly then shut down (short-cycling) or fail to stay running on cold days.

Specifications

Part Number: 0130F00010S
Type: Flame rectification sensor (flame rod)
Brand: Goodman (OEM)
Compatible Equipment: ACSS920402BNAA and related 92% AFUE furnaces
Function: Confirms burner ignition / triggers safety lockout
Mounting: Single-screw direct-fit replacement

OEM vs. Generic

OEM flame sensors use the precise rod alloy and mounting geometry that Goodman control boards expect, ensuring a reliable microamp signal. Generic sensors can produce weak or erratic flame signals, leading to intermittent lockouts that are difficult to diagnose. The genuine 0130F00010S restores factory-spec performance.

Installation Difficulty

Easy. Most replacements take 10–20 minutes — disconnect power, remove the single mounting screw, swap the sensor, and reconnect the wire. No special tools required. Always cut power before servicing the furnace.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACS...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACSS920402BNAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACSS920402BNAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACSS920402BNAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu