What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACSH961155DXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACSH961155DXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACSH961155DXAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ACSH961155DXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2361
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2361 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor (flame-rectification rod) built for the ACSH961155DXAA 96% AFUE gas furnace. The flame sensor confirms that a flame is actually present after ignition by conducting a micro-amp rectification current through the flame. When the sensing rod becomes oxidized or fails, the control board can no longer prove flame and shuts the gas valve — producing the classic symptom of a furnace that lights for a few seconds, then drops out and short-cycles or locks out on a no-heat fault.

Specifications

OEM Part Number: 0130F00010S
Type: Flame-rectification sensor rod
Compatible Model: Goodman ACSH961155DXAA (verify against your unit)
Signal: Micro-amp flame-rectification (typ. 1–6 µA flame current)
Mount: Single-screw burner-assembly mount with spade terminal
Brand: Goodman / Amana compatible

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length, alloy, and ceramic insulator so it sits properly in the flame envelope and reads a stable signal. Generic sensors can sit too shallow or deep, giving weak or erratic flame current that causes intermittent lockouts. OEM is the reliable choice for a permanent fix.

Install Difficulty: Easy (1/5)

Cut power, remove the single mounting screw, unplug the wire, and install the new sensor. Avoid touching the rod with bare fingers. About 15–20 minutes with a 1/4" nut driver. If you've been cleaning the old sensor repeatedly, replacing it ends the cycle.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACS...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACSH961155DXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACSH961155DXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACSH961155DXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu