What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACSH960905DXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACSH960905DXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACSH960905DXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for ACSH960905DXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2349
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2349 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the Goodman ACSH960905DXAA gas furnace and compatible models. The flame sensor confirms that a flame is present after ignition by conducting a microamp current through the flame to the control board. When this rod becomes coated, weak, or cracked, the furnace lights briefly then shuts down — the classic short-cycle or ignition-lockout symptom. Replacing it with the correct OEM part restores reliable, safe operation.

Specifications

Part Type: Flame sensor / flame rectification rod
OEM Part Number: 0130F00010S
Compatible Model: ACSH960905DXAA (Goodman gas furnace)
Equipment: Furnace ignition / safety system
Function: Confirms flame presence to the control board
Fitment: Direct OEM replacement

OEM vs. Generic

Generic flame rods often use different rod lengths, bend angles, or mounting-bracket positions, which can place the tip outside the flame envelope and cause intermittent dropouts. The genuine Goodman OEM 0130F00010S guarantees correct rod geometry and bracket alignment so the sensor sits squarely in the burner flame for a stable signal.

Install Difficulty

Easy to Moderate (2/5). Shut off power and gas, remove one mounting screw, disconnect the spade terminal, and install the new sensor. About 10–15 minutes with a 1/4-inch nut driver. Avoid touching the rod with bare fingers — oils can foul it.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACS...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACSH960905DXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACSH960905DXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACSH960905DXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu