What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACSH960704CXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACSH960704CXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACSH960704CXAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ACSH960704CXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2326
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2326 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification sensor for the ACSH960704CXAA 96% AFUE gas furnace. The flame sensor proves that the burners have actually ignited by detecting the micro-amp current that flows through an active flame. When the sensor oxidizes or fails, the control board sees no flame signal and shuts the gas valve within seconds — producing the classic symptom of a furnace that lights, runs a few seconds, then drops out and short-cycles.

Specifications

OEM Part Number: 0130F00010S
Component: Flame sensor / flame-rectification rod
Fits: Goodman ACSH960704CXAA (96% AFUE furnace)
Function: Burner flame proving / safety interlock
Mounting: Single-screw bracket at burner assembly
Equipment: Gas furnace

OEM vs. Generic

OEM sensors use the correct rod length, alloy, and bracket offset so the tip sits properly in the burner flame for a strong, stable signal. Generic substitutes frequently mis-position the rod, causing weak micro-amp readings and intermittent lockouts. Choose OEM for a reliable, exact-fit replacement.

Installation Difficulty

Easy (1/5). Typically a single-screw swap that most homeowners can complete in minutes. Shut off power and gas first, and avoid touching the ceramic insulator. If your furnace continues to lock out after replacement, have a licensed technician check the burners and control board.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACS...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACSH960704CXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACSH960704CXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACSH960704CXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu