What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACES960804CNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACES960804CNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACES960804CNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for ACES960804CNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2269
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2269 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S Flame Sensor (flame rod) is the genuine OEM safety probe that confirms burner ignition on the ACES960804CNAA gas furnace. It uses flame rectification to send a small microamp signal back to the control board; when the board sees that signal it keeps the gas valve open, and when it doesn't it locks out for safety.

A dirty, cracked, or worn flame sensor is the single most common cause of a furnace that lights for a few seconds and then shuts off (short cycling) or that goes into ignition lockout. If cleaning the rod no longer holds a stable signal, replacing it with this exact OEM sensor restores reliable, safe ignition.

Specifications

OEM Part Number: 0130F00010S
Type: Flame sensor / flame rectification rod
Function: Proves burner flame, signals control board
Brand: Goodman
Compatible Model: ACES960804CNAA furnace
Construction: Kanthal/stainless rod with ceramic insulator and spade terminal

OEM vs. Generic

Generic flame rods often differ in rod length, insulator height, and bracket angle, which changes the flame-immersion point and microamp reading — leading to weak signals and recurring lockouts. The OEM 0130F00010S matches Goodman geometry exactly for a strong, stable flame signal.

Install Difficulty

Easy (1/5) — One mounting screw and a single push-on wire; about 10 minutes. Always shut off power and gas, and avoid touching the rod tip with bare fingers.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACE...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACES960804CNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACES960804CNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACES960804CNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu