What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACES960403BNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACES960403BNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACES960403BNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for ACES960403BNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2248
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2248 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification sensor for ACES960403BNAA gas furnaces and compatible Goodman/Amana models. The sensor rod sits in the burner flame and feeds a tiny rectified microamp signal back to the control board to prove the flame is lit. As the rod oxidizes or carbon builds up, the signal drops and the board shuts the gas valve as a safety measure — the classic symptom of a furnace that lights for a few seconds then drops out and repeatedly tries to relight.

Specifications

Part Number: 0130F00010S
Type: Flame-rectification sensor rod
Function: Proves flame presence to the control board
Signal: Microamp DC (rectified)
Brand: Goodman / Amana OEM
Fits: ACES960403BNAA and compatible furnaces

OEM vs. Generic

The OEM sensor uses the correct rod length, bracket angle, and high-temperature alloy so the flame fully engulfs the tip and the board reads a strong, stable signal. Generic sensors with different geometry can read low and cause intermittent lockouts. OEM also protects warranty coverage.

Install Difficulty

Easy. Cut power, remove one mounting screw, unplug the wire lead, and install the new rod — don't touch the tip with bare fingers. About 10–15 minutes, no special tools required.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACE...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACES960403BNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACES960403BNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACES960403BNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu