What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACEC961005CNAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACEC961005CNAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACEC961005CNAB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ACEC961005CNAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-0130F00010S
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-0130F00010S Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the ACEC961005CNAB gas furnace. After ignition, the control board uses this sensor to confirm a flame is present; if it fails to detect the micro-amp signal, the board shuts off gas as a safety measure. A dirty or worn flame sensor is the single most common cause of a furnace that lights briefly then shuts down (short cycling).

Specifications

Part type: Flame sensor / flame-rectification rod
Function: Confirms burner flame for the ignition control
Material: High-temperature alloy rod with ceramic insulator
Connection: OEM single spade terminal
Brand: Goodman OEM
OEM part number: 0130F00010S
Compatible model: ACEC961005CNAB

OEM vs. Generic

The genuine 0130F00010S uses the correct rod length, alloy, and insulator rating to produce a stable flame-rectification signal at Goodman's specified position in the flame. Generic sensors may sit at the wrong depth or generate a weak signal, leading to intermittent lockouts. The OEM part ensures consistent, reliable detection.

Install Difficulty

Rating: Easy (1–2/5). Turn off power and gas, remove the single mounting screw, unplug the wire, and install the new sensor in the same position. While the burner area is open, this is a great time to verify clearances. Total time is about 10 minutes — one of the most DIY-friendly furnace repairs.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACE...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACEC961005CNAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACEC961005CNAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACEC961005CNAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu