What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACEC961005CNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACEC961005CNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACEC961005CNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for ACEC961005CNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-163
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-163 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for Goodman ACEC961005CNAA furnaces. It confirms to the control board that a flame is present after ignition; if it can't sense flame, the board closes the gas valve as a safety measure. A dirty or failing flame sensor is the most common cause of a furnace that lights briefly then shuts off (short-cycling) or fails to stay lit.

Specifications

Part type: Flame sensor / flame rectification rod
Function: Proves burner flame for the ignition control
Brand: Goodman (OEM)
OEM part number: 0130F00010S
Fits: ACEC961005CNAA and compatible Goodman/Amana furnaces
Construction: High-temperature alloy rod with ceramic insulator

OEM vs. Generic

Flame sensors rely on a tiny microamp signal; rod length, position, and insulator quality affect that reading. Generic sensors that sit at the wrong height in the flame produce weak or unstable signals and erratic lockouts. This OEM sensor is dimensioned to Goodman's spec for a strong, reliable flame signal.

Installation Difficulty

Easy (2/5). Power off the furnace, remove one mounting screw and the sensor wire, and install the new rod. No gas work required. After installation, verify the burner stays lit through a full heat cycle. A licensed HVAC technician can confirm the microamp signal if symptoms persist.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACE...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACEC961005CNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACEC961005CNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACEC961005CNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu