What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACEC960403BNAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACEC960403BNAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACEC960403BNAB — 0130F00010S

Name: OEM Goodman Flame Sensor for ACEC960403BNAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-109
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-109 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor for the ACEC960403BNAB furnace. After ignition, this single metal rod sits in the burner flame and uses flame rectification to send a small microamp signal back to the control board, confirming that a flame is actually present. If the board does not detect that signal, it closes the gas valve within seconds for safety. A dirty, cracked, or worn flame sensor is one of the most common causes of furnaces that light briefly and then shut down (short cycling on flame failure).

Specifications

OEM Part Number: 0130F00010S
Type: Single-rod flame sensor (flame rectification)
Signal: Microamp DC flame current to control board
Material: High-temperature alloy rod with ceramic insulator
Compatibility: Goodman / Amana ACEC960403BNAB

OEM vs. Generic

The genuine Goodman 0130F00010S has the correct rod length, bend, and insulator so it sits properly in the flame and produces a strong, stable signal. Generic sensors often differ in geometry, yielding weak flame current and intermittent lockouts. OEM gives the most reliable flame proving.

Installation Difficulty

Easy (2/5). Shut off power, remove one mounting screw and the wire connector, and swap in the new sensor. Avoid touching the rod with bare fingers. Many homeowners pair this replacement with a gentle cleaning of the burner area.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACE...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACEC960403BNAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACEC960403BNAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACEC960403BNAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu