What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACEC801005CXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACEC801005CXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACEC801005CXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for ACEC801005CXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-82
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-82 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame rod that confirms the burner has lit on the ACEC801005CXAA and other compatible Goodman/Amana gas furnaces. The sensor uses flame rectification — passing a tiny microamp current through the flame — to tell the control board the burner is firing. When the rod oxidizes or weakens, the most common symptom is a furnace that lights for a few seconds then shuts off (short-cycling) or goes into ignition lockout.

Specifications

Function: Flame sensor / flame rectification rod
OEM part number: 0130F00010S
Fits: Goodman ACEC801005CXAA and compatible models
Sensing: Microamp flame-rectification signal to ignition control
Rod material: High-temp Kanthal-type sensing element
Mount: OEM bracket and terminal for direct replacement

OEM vs. Generic

OEM sensors provide the correct rod length, bracket geometry, and terminal so the flame envelope and signal strength match factory spec. Generic sensors may bolt up but sit slightly off the flame, producing a weak or unstable microamp reading and nuisance lockouts. The OEM 0130F00010S restores a clean, reliable flame signal.

Installation Difficulty

Easy. One mounting screw and one push-on wire connector. Shut off power, swap the sensor, and reconnect. A DIY-friendly repair, though handling the burner area cleanly (no fingerprints on the rod) helps. If the issue persists, have the gas valve and control board checked.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACE...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACEC801005CXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACEC801005CXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACEC801005CXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu