What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACEC800603AXAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACEC800603AXAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACEC800603AXAB — 0130F00010S

Name: OEM Goodman Flame Sensor for ACEC800603AXAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-0130F00010S
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-0130F00010S Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the Goodman/Amana ACEC800603AXAB and compatible furnaces. The sensor sits in the burner flame and signals the control board that ignition succeeded; if it fails to detect flame, the board closes the gas valve and locks out for safety. A dirty or failed flame sensor is one of the most common causes of furnaces that light briefly then shut off (short-cycle lockout).

Specifications

Type: Flame sensor / flame rectification rod
Function: Proves burner flame to the ignition control
OEM Part Number: 0130F00010S
Brand: Goodman / Amana (interchangeable)
Fits: ACEC800603AXAB and related furnace models
Connection: Single spade terminal, bracket-mounted rod

OEM vs. Generic

The OEM sensor has the exact rod length, bend, and mounting bracket so it lands correctly in the flame envelope. Generic rods often sit too high or low, producing a weak microamp signal and repeat lockouts. For reliable flame proving, OEM placement matters.

Installation Difficulty: Easy

One screw and one wire — typically a 10-minute job. Disconnect power first. If the old sensor was only dirty, light cleaning with fine abrasive may restore it, but a cracked ceramic insulator or weak signal calls for replacement.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACE...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACEC800603AXAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACEC800603AXAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACEC800603AXAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu