What are the specs for this Drain Trap?

The correct replacement for Goodman model ACVM970603BNAA — 0161F00046 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVM970603BNAA — 0161F00046.

What symptoms indicate I need a new drain trap?

Common symptoms that indicate you need a new drain trap include unusual noises, intermittent operation, complete failure to operate, or visible damage. For specific diagnostic guidance, visit nationalhvacparts.com/pages/hvac-diagnostic.

Is this drain trap compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Condensate Drain Trap for ACVM970603BNAA — 0161F00046

Name: OEM Goodman Condensate Drain Trap for ACVM970603BNAA — 0161F00046
Brand: Goodman
SKU: GOODMAN-2997
Price: 16.95 USD
Availability: InStock

SKU: GOODMAN-2997 Brand: Goodman

$16.95 $22.88

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0161F00046 Condensate Drain Trap is a genuine OEM component for the ACVM970603BNAA high-efficiency furnace and compatible Goodman/Amana condensing models. The trap collects acidic condensate from the secondary heat exchanger and inducer, maintaining a water seal that prevents flue gases from escaping while allowing condensate to drain freely.

A cracked, clogged, or algae-fouled trap is a frequent cause of pressure-switch lockouts, water leaks around the furnace base, and intermittent shutdowns. Installing a fresh OEM trap restores proper drainage and reliable ignition cycles.

Specifications

Part Number: 0161F00046
Type: Condensate drain trap assembly
Application: High-efficiency (condensing) gas furnace
Function: Water seal + condensate drainage
Compatible Model: ACVM970603BNAA
Brand: Goodman (also fits Amana)

OEM vs. Generic

The OEM Goodman trap matches the factory port diameters, mounting geometry, and internal float/seal design for a leak-free connection. Generic universal traps often require additional fittings and adapters, increasing leak points and the risk of nuisance pressure-switch faults.

Installation Difficulty

Moderate (3/5). Power down the furnace, disconnect the inlet and outlet hoses (note the clamp positions), remove the old trap, and install the replacement with fresh clamps. Prime the trap with water before restoring power so the seal is intact. Allow 20–30 minutes; have a towel ready for residual condensate.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Condensate Drain Tra...

$16.95

Frequently Asked Questions

Does this Drain Trap fit my Goodman ACVM970603BNAA — 0161F00046?

Yes. This is the factory-specified OEM drain trap for the Goodman ACVM970603BNAA — 0161F00046. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the drain trap on my Goodman ACVM970603BNAA — 0161F00046?

Refer to your equipment service manual for model-specific steps. General approach: turn off power, photograph connections, remove old part, install new part, restore power and test. For gas components, hire a licensed technician. Email info@nationalhvacparts.com for guidance.

What symptoms mean I need a new drain trap?

Common symptoms: unusual noises, intermittent operation, complete failure, or visible damage. Visit our diagnostic hub for symptom-based troubleshooting.

Is this drain trap compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman drain trap?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu