What are the specs for this Flue / Vent?

The correct replacement for Goodman model VMS81005CNAA — 0128F00006 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number VMS81005CNAA — 0128F00006.

What symptoms indicate I need a new flue / vent?

Common symptoms that indicate you need a new flue / vent include unusual noises, intermittent operation, complete failure to operate, or visible damage. For specific diagnostic guidance, visit nationalhvacparts.com/pages/hvac-diagnostic.

Is this flue / vent compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Chimney Transition Bottom Flue Vent for VMS81005CNAA — 0128F00006

Name: OEM Goodman Chimney Transition Bottom Flue Vent for VMS81005CNAA — 0128F00006
Brand: Goodman
SKU: GOODMAN-13749
Price: 18.95 USD
Availability: InStock

SKU: GOODMAN-13749 Brand: Goodman

$18.95 $24.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0128F00006 Chimney Transition Bottom

The Goodman 0128F00006 is a genuine chimney transition bottom — the sheet-metal flue-vent fitting that channels combustion gases from the heat exchanger collector box up into the furnace's vent connector on VMS81005CNAA gas furnaces and compatible Goodman/Amana models. A rusted, corroded, or misfitting transition can leak flue gases and disrupt draft, so a clean, factory-shaped replacement is important for safe venting.

Specifications

Type: Chimney / flue transition bottom piece
Function: Flue-gas collector-to-vent transition
Material: Corrosion-resistant coated / aluminized steel
Fit: Model-specific stamped geometry and gasket surface
Fits: Goodman VMS81005CNAA and related 80% furnaces
OEM part number: 0128F00006

OEM vs. Generic

This transition is stamped to match the exact bolt pattern and gasket seat of your furnace's collector box. The OEM 0128F00006 seals correctly the first time. Generic or fabricated substitutes rarely match the flange geometry, risking flue-gas leakage and improper draft — an unacceptable risk on a venting component. Fit OEM here.

Install Difficulty

Moderate (3/5). Shut off power and gas, disconnect the vent connector, remove the collector-box fasteners, and swap the transition with a fresh gasket/sealant as required. About 30–45 minutes and access can be tight. A combustion/draft check after reassembly is strongly advised. Professional installation recommended for any flue-vent work.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Chimney Transition B...

$18.95

Frequently Asked Questions

Does this Flue / Vent fit my Goodman VMS81005CNAA — 0128F00006?

Yes. This is the factory-specified OEM flue / vent for the Goodman VMS81005CNAA — 0128F00006. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flue / vent on my Goodman VMS81005CNAA — 0128F00006?

Refer to your equipment service manual for model-specific steps. General approach: turn off power, photograph connections, remove old part, install new part, restore power and test. For gas components, hire a licensed technician. Email info@nationalhvacparts.com for guidance.

What symptoms mean I need a new flue / vent?

Common symptoms: unusual noises, intermittent operation, complete failure, or visible damage. Visit our diagnostic hub for symptom-based troubleshooting.

Is this flue / vent compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flue / vent?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu