What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC800604BNAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC800604BNAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Amana Flame Sensor for AMVC800604BNAB Furnace — 0130F00010S

Name: OEM Goodman Amana Flame Sensor for AMVC800604BNAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-7900
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-7900 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

OEM Goodman / Amana Flame Sensor 0130F00010S

Restore reliable ignition and safe operation on your Amana AMVC800604BNAB variable-speed gas furnace with the genuine Goodman 0130F00010S flame sensor. This flame rectification rod is the component your furnace's control board relies on to confirm that a flame is present after ignition. When it becomes coated with oxide or carbon, the furnace lights and then shuts down within seconds — a hard-start or short-cycle symptom that a new sensor almost always resolves.

Part Number: 0130F00010S (OEM)
Compatible Model: AMVC800604BNAB and related Goodman/Amana furnaces
Function: Flame rectification / flame proving
Material: High-temperature Kanthal rod with ceramic insulator
Equipment Type: Gas Furnace

OEM vs. Generic

Generic flame sensors are often close in shape but vary in rod length and mounting-tab geometry, which changes the flame-immersion depth and can cause intermittent lockouts. This factory OEM part matches the original micro-amp signal characteristics your AMVC8 control board expects, so you get a clean flame signal on the first try and no nuisance faults.

Installation Difficulty: Easy

A single-screw swap that most homeowners complete in under 10 minutes. Shut off power and gas at the furnace, remove the burner-compartment door, unclip the sensor wire, remove the mounting screw, install the new sensor, and reassemble. No tools beyond a 1/4" nut driver required. Always cut power before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Amana Flame Sensor f...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC800604BNAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC800604BNAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC800604BNAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu