What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMS80805CXAC Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMS80805CXAC Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Amana Flame Sensor for AMS80805CXAC Furnace — 0130F00010S

Name: OEM Goodman Amana Flame Sensor for AMS80805CXAC Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-7015
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-7015 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor engineered for the Amana/Goodman AMS80805CXAC 80% AFUE gas furnace and compatible 80,000 BTU multi-position models. The flame sensor (flame rod) confirms that the burner has lit during each ignition cycle. When it becomes coated in oxide or fails, the furnace will light briefly and then shut down on a lockout — a leading cause of intermittent no-heat calls.

Specifications

OEM Part Number: 0130F00010S
Function: Rectification flame sensing rod
Fits: AMS80805CXAC and related Goodman/Amana 80% gas furnaces
Material: Kanthal sensing element with steel bracket
Connection: Spade terminal, single-wire

OEM vs. Generic

This is a factory OEM Goodman component built to exact furnace tolerances, ensuring correct rod position in the flame envelope and a stable microamp signal. Generic aftermarket sensors are lower cost but may vary in rod length and bracket geometry, causing weak flame signal and nuisance lockouts. For dependable long-term flame detection, OEM is recommended.

Installation Difficulty

Easy — Typically a single mounting screw and one wire connector. Always cut power at the furnace before servicing. Gently clean or replace, verify microamp reading, and confirm a full heat cycle.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Amana Flame Sensor f...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMS80805CXAC Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMS80805CXAC Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMS80805CXAC Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu