What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMS80453ANAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMS80453ANAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Amana Flame Sensor for AMS80453ANAA Furnace — 0130F00010S

Name: OEM Goodman Amana Flame Sensor for AMS80453ANAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-6750
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-6750 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman / Amana Flame Sensor 0130F00010S

The 0130F00010S flame sensor is the factory-specified flame-proving rod for the Goodman/Amana AMS80453ANAA gas furnace and many compatible 80% AFUE multi-position models. The flame sensor confirms the burners have lit by generating a small microamp rectification signal; when it fails, the control board shuts the gas valve within seconds, causing short-cycling or a furnace that lights then drops out. Replacing a corroded or cracked sensor is the single most common fix for intermittent no-heat calls.

Specifications

OEM Part Number: 0130F00010S
Type: Flame sensing rod (single-rod, rectification)
Compatible Model: AMS80453ANAA and cross-compatible Goodman/Amana furnaces
Application: 80% AFUE gas furnace burner assembly
Material: High-temp Kanthal rod with ceramic insulator

OEM vs. Generic

Our OEM Goodman/Amana sensor matches factory rod length, insulator geometry, and terminal orientation for a true drop-in fit and correct flame signal strength. Generic universal sensors often require bending the rod or adapting terminals, which can lower the microamp reading and trigger nuisance lockouts. For dependable flame proving, we recommend OEM.

Install Difficulty

Easy (1/5) — Cut power, remove one mounting screw, unplug the spade terminal, swap, and reinstall. Wipe the new rod with a clean cloth (never sandpaper) before first light. Typical time: 10–15 minutes. No specialty tools required.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Amana Flame Sensor f...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMS80453ANAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMS80453ANAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMS80453ANAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu