What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH81205DNBB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH81205DNBB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Amana Flame Sensor for AMH81205DNBB — 0130F00010S

Name: OEM Goodman Amana Flame Sensor for AMH81205DNBB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-6090
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-6090 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

This genuine OEM Goodman/Amana flame sensor (part number 0130F00010S) is a direct-fit replacement for the AMH81205DNBB gas furnace and many other Goodman, Amana, and Daikin 80% and 90%+ AFUE models. The flame sensor is one of the most common causes of a furnace that lights briefly and then shuts down — over time carbon and oxidation build up on the rod, weakening the microamp flame-rectification signal until the control board can no longer confirm a flame and locks out the burners. Replacing the sensor restores dependable ignition and clears intermittent no-heat and short-cycling faults.

Specifications

OEM Part Number: 0130F00010S
Component: Flame sensor / flame rod
Compatible Model: AMH81205DNBB (and related Goodman/Amana furnaces)
Function: Flame rectification / proof-of-flame safety
Type: Single-rod sensor with mounting bracket
Brand: Goodman / Amana (OEM)

OEM vs. Generic

The OEM 0130F00010S is built to the exact rod length, alloy, and bracket geometry the AMH81205DNBB control sequence expects, ensuring a stable flame-current signal and long service life. Generic aftermarket sensors are lower cost but can vary in rod alloy and mounting depth, sometimes producing a marginal microamp reading that triggers nuisance lockouts. For a safety-critical component, we recommend OEM.

Installation Difficulty

Easy (1 of 5). Turn off power and gas, remove one screw, unplug the wire lead, and swap the sensor — typically a 10–15 minute job with a nut driver. Always cut power at the disconnect before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Amana Flame Sensor f...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH81205DNBB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH81205DNBB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH81205DNBB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu