What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH80805CXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80805CXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Amana Flame Sensor for AMH80805CXAA — 0130F00010S

Name: OEM Goodman Amana Flame Sensor for AMH80805CXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-5650
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-5650 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman / Amana 0130F00010S Flame Sensor

This genuine OEM flame sensor (part number 0130F00010S) is a direct-fit replacement for the Amana AMH80805CXAA 80% gas furnace and many other Goodman-family models. The flame sensor is the safety component that confirms a flame is present during the ignition sequence. When it becomes coated with oxidation or carbon, the furnace lights briefly and then shuts down on lockout — one of the most common no-heat callbacks. Replacing this inexpensive part is often all it takes to restore reliable operation.

Specifications

OEM Part Number: 0130F00010S
Brand: Goodman / Amana
Application: 80% single-stage gas furnaces
Compatible model: AMH80805CXAA
Sensor type: Single-rod flame rectification probe
Mounting: Screw-in burner bracket

OEM vs. Generic

Our OEM Goodman/Amana sensor uses the factory rod length, ceramic insulator, and bracket geometry, so flame signal microamps land in spec on the first try. Our Generic Flame Sensor Rod alternative fits the same bracket and saves a few dollars, but on high-efficiency or tight-clearance burners the OEM rod is the safer choice for consistent flame proving. Both include the mounting screw.

Install Difficulty: Easy (1 of 5)

A 10-minute repair for most homeowners: shut off power and gas, remove one screw, unplug the sensor lead, install the new rod, and reconnect. A light cleaning of the burner area is recommended. Always verify flame current with a meter if available.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Amana Flame Sensor f...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH80805CXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH80805CXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH80805CXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu