What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH80805CNBA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80805CNBA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman/Amana Flame Sensor for AMH80805CNBA Furnace — 0130F00010S

Name: OEM Goodman/Amana Flame Sensor for AMH80805CNBA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-5615
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-5615 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman/Amana 0130F00010S Flame Sensor

The 0130F00010S is a genuine OEM flame sensor engineered for the Amana AMH80805CNBA gas furnace and other Goodman-family 80% AFUE models. The flame sensor confirms that the burner has lit during each ignition cycle; when it weakens or becomes coated with oxide, the furnace will spark, light briefly, then shut down on flame-sense failure. Replacing this low-cost rod is the most common fix for short-cycling and no-heat calls.

OEM part number: 0130F00010S
Fits: Amana/Goodman AMH80805CNBA and compatible 80% furnaces
Function: flame rectification / flame proving
Material: high-temperature stainless steel rod with ceramic insulator
Single-terminal spade connection

OEM vs. Generic

This is the factory OEM sensor, built to the exact rod length, bend geometry, and microamp signal spec your control board expects. Universal generic sensors often require bending to fit and can produce a marginal flame-signal reading that trips intermittent faults. The OEM part drops in and reads clean.

Install Difficulty: Easy

One screw and one wire. Turn off power and gas, remove the sensor, transfer the spade connector, and reinstall. Gently clean the burner-cabinet contact surface before mounting. Typical time: 10–15 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman/Amana Flame Sensor f...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH80805CNBA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH80805CNBA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH80805CNBA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu