What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMES960603BNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMES960603BNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Amana Flame Sensor for AMES960603BNAA — 0130F00010S

Name: OEM Goodman Amana Flame Sensor for AMES960603BNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4814
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4814 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine OEM Goodman/Amana 0130F00010S Flame Sensor is a flame-rectification rod for AMES960603BNAA gas furnaces and compatible Goodman/Amana models. This sensor confirms the burner has actually ignited by detecting the microamp current that flows through an established flame. A weak, corroded, or failed flame sensor is the single most common cause of furnace short-cycling — the furnace lights, then shuts down seconds later.

Specifications

Type: Flame rectification sensor rod
Function: Proves burner flame to the control board
Signal: Microamp flame-current sensing
OEM Part #: 0130F00010S
Brand: Goodman / Amana
Fits: AMES960603BNAA and compatible furnaces

OEM vs. Generic

Rod length, tip position, and insulator geometry determine whether the sensor sits correctly in the flame envelope. Generic sensors often mis-position the rod, producing a weak flame signal and continued short-cycling. This OEM 0130F00010S is dimensionally exact for a reliable, strong flame-sense reading.

Installation Difficulty

Easy (1/5). Shut off power, remove the single mounting screw, unplug the wire lead, and install the new sensor. Avoid touching the rod with bare fingers. If you have the old sensor out, this is a great time to clean the burner assembly.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Amana Flame Sensor f...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMES960603BNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMES960603BNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMES960603BNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu