What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEH960403BXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEH960403BXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Amana Flame Sensor for AMEH960403BXAA Furnace — 0130F00010S

Name: OEM Goodman Amana Flame Sensor for AMEH960403BXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4554
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4554 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman/Amana 0130F00010S Flame Sensor (flame rod) is the OEM safety component that confirms a flame is present after ignition on the AMEH960403BXAA high-efficiency gas furnace. Using flame-rectification, it sends a micro-amp signal to the control board proving burner flame; if the signal is weak or absent, the board shuts off gas to prevent unburned fuel from accumulating. A dirty, corroded, or cracked flame sensor is the single most common cause of furnace short-cycling and ignition lockouts—the burners light, then shut off after a few seconds.

Specifications

OEM Part Number: 0130F00010S
Compatible Model: AMEH960403BXAA (Amana / Goodman gas furnace)
Component Type: Flame sensor / flame rectification rod
Function: Flame proving safety signal to control board
Brand: Goodman / Amana (genuine OEM)

OEM vs. Generic

This genuine OEM flame sensor matches the exact rod length, mounting bracket, and terminal of the AMEH960403BXAA, so it seats correctly in the flame path and delivers a strong, stable microamp signal. Generic sensors often sit at the wrong position in the flame, producing a marginal signal that causes intermittent lockouts. The factory part restores reliable, code-compliant flame proving.

Install Difficulty

Easy (2 of 5). Shut off power and gas, remove the single mounting screw, unplug the sensor wire, install the new sensor, and reconnect. A confident DIYer can complete it in minutes; if you're unsure, an HVAC tech can swap it during a service call.

Keep a spare on hand—flame sensors are inexpensive and a leading cause of no-heat calls.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Amana Flame Sensor f...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEH960403BXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEH960403BXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEH960403BXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu