What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEH800805CXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEH800805CXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Amana Flame Sensor for AMEH800805CXAA Furnace — 0130F00010S

Name: OEM Goodman Amana Flame Sensor for AMEH800805CXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4448
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4448 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman/Amana 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the AMEH800805CXAA gas furnace. The sensor confirms that a flame is present after ignition by passing a small microamp current through the flame; if it cannot detect the flame, the control board shuts off the gas valve for safety. A dirty, cracked, or worn flame sensor is one of the most common causes of furnace short-cycling and ignition lockout — the burners light, then shut down after a few seconds.

Specifications

OEM Part Number: 0130F00010S
Component: Flame sensor / rectification rod
Fits Model: AMEH800805CXAA
Function: Detects flame presence, signals control board
Symptoms it fixes: short-cycling, flame-fail lockout, no sustained heat
Brand: Goodman / Amana (genuine OEM)

OEM vs. Generic

The Genuine OEM 0130F00010S uses the correct rod length, mounting bracket, and alloy for a reliable flame signal on the AMEH burner. Generic sensors can sit at the wrong position in the flame and produce a weak microamp reading, causing intermittent lockouts. OEM is recommended for dependable ignition.

Installation Difficulty: Easy

Rated 1 of 5. With power off, remove one mounting screw and the wire connector, then install the new sensor. Avoid touching the rod with bare fingers. A confident DIYer can complete this in under 10 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Amana Flame Sensor f...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEH800805CXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEH800805CXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEH800805CXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu