What are the specs for this Pressure Switch?

The correct replacement for Goodman model ACES800403ANAA — 0130F00504 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACES800403ANAA — 0130F00504.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman .60" NO Pressure Switch for ACES800403ANAA — 0130F00504

Name: OEM Goodman .60" NO Pressure Switch for ACES800403ANAA — 0130F00504
Brand: Goodman
SKU: GOODMAN-2179
Price: 24.95 USD
Availability: InStock

SKU: GOODMAN-2179 Brand: Goodman

$24.95 $33.68

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00504 Pressure Switch — -0.60" WC, Normally Open (Orange)

The Goodman 0130F00504 is the orange-coded draft-proving pressure switch for ACES800403ANAA gas furnaces. It verifies that the inducer/draft motor is pulling adequate vacuum before the control board energizes the igniter and gas valve. Rated at -0.60 inches of water column and wired normally open, the contacts close once correct draft is sensed — a critical safety interlock that prevents ignition without proper venting.

Specifications

Part type: Air / draft pressure switch
OEM part number: 0130F00504
Set point: -0.60" W.C.
Contact configuration: Normally open (NO)
Color code: Orange
Brand: Goodman
Equipment: Gas furnace
Primary fitment: ACES800403ANAA

OEM vs. Generic

Pressure switches are matched to a furnace's specific draft characteristics. The genuine OEM Goodman switch carries the exact -0.60" set point and orange code for this model, so it proves draft reliably without nuisance lockouts or unsafe early ignition. Generic switches with the wrong rating are a leading cause of intermittent no-heat calls — install OEM.

Installation Difficulty

Easy to moderate. Power down, note and transfer the wiring, remove the mounting screws, and reconnect the silicone draft hose firmly to the correct port. Inspect that hose for cracks or condensate blockage while you're in there. Most installs take 15–20 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman .60" NO Pressure Swi...

$24.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman ACES800403ANAA — 0130F00504?

Yes. This is the factory-specified OEM pressure switch for the Goodman ACES800403ANAA — 0130F00504. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman ACES800403ANAA — 0130F00504?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu