What are the specs for this Burner?

The correct replacement for Goodman model AMH80803BNBD — B4022700 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80803BNBD — B4022700.

What symptoms indicate I need a new burner?

Common symptoms that indicate you need a new burner include unusual noises, intermittent operation, complete failure to operate, or visible damage. For specific diagnostic guidance, visit nationalhvacparts.com/pages/hvac-diagnostic.

Is this burner compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman 3-Inch In-Shot Burner for AMH80803BNBD — B4022700

Name: OEM Goodman 3-Inch In-Shot Burner for AMH80803BNBD — B4022700
Brand: Goodman
SKU: GOODMAN-5461
Price: 18.95 USD
Availability: InStock

SKU: GOODMAN-5461 Brand: Goodman

$18.95 $24.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman B4022700 3" In-Shot Burner

The B4022700 is a genuine Goodman/Amana OEM 3-inch in-shot burner engineered for the AMH80803BNBD 80% AFUE gas furnace. Each in-shot burner mixes gas and primary air and fires the flame directly into a single heat-exchanger tube. A furnace uses one burner per exchanger cell, so a burner set for an 80,000 BTU furnace typically requires several matched units. Replace any burner that shows rust-out, cracking, flame rollout, delayed ignition, or a lazy yellow flame.

Specifications

Part Number: B4022700
Type: In-shot (monoport) burner
Length: 3 inches
Fuel: Natural gas (pair with the correct orifice for LP conversions)
Material: Corrosion-resistant aluminized steel
Fits Model: AMH80803BNBD and compatible Goodman/Amana furnaces

OEM vs. Generic

This is a true OEM burner with factory-set port sizing and venturi geometry, which is critical for a clean blue flame and correct CO output. Generic burners with mismatched port dimensions can cause noisy ignition, sooting, and safety-related lockouts. OEM keeps your combustion within spec.

Installation Difficulty

Moderate (3 of 5). Shut off gas and power, remove the burner assembly retaining screws, slide out the old burner, and seat the replacement so it aligns with the ignitor/flame sensor and heat-exchanger inlet. After install, verify flame appearance and confirm proper ignition. We recommend a licensed HVAC technician for gas-side work.

Always confirm your fuel type and orifice sizing before firing the furnace.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman 3-Inch In-Shot Burne...

$18.95

Frequently Asked Questions

Does this Burner fit my Goodman AMH80803BNBD — B4022700?

Yes. This is the factory-specified OEM burner for the Goodman AMH80803BNBD — B4022700. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the burner on my Goodman AMH80803BNBD — B4022700?

Refer to your equipment service manual for model-specific steps. General approach: turn off power, photograph connections, remove old part, install new part, restore power and test. For gas components, hire a licensed technician. Email info@nationalhvacparts.com for guidance.

What symptoms mean I need a new burner?

Common symptoms: unusual noises, intermittent operation, complete failure, or visible damage. Visit our diagnostic hub for symptom-based troubleshooting.

Is this burner compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman burner?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu