What are the specs for this Pressure Switch?

The correct replacement for Goodman model AMVC951155DXBA — 20197308 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC951155DXBA — 20197308.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman -.10" NO Pressure Switch for AMVC951155DXBA — 20197308

Name: OEM Goodman -.10" NO Pressure Switch for AMVC951155DXBA — 20197308
Brand: Goodman
SKU: GOODMAN-8992
Price: 32.95 USD
Availability: InStock

SKU: GOODMAN-8992 Brand: Goodman

$32.95 $42.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 20197308 Pressure Switch is a genuine OEM -0.10 in. WC, normally open (NO) air-proving switch for the AMVC951155DXBA modulating variable-speed furnace and compatible Goodman/Amana models. It confirms that the inducer/draft blower is establishing correct negative pressure and that the vent and condensate paths are clear before the control board permits ignition. If the switch fails to close, the furnace safely locks out ignition — this switch is core to safe combustion venting.

Specifications

Part type: Air-proving / draft pressure switch
Set point: -0.10 in. WC (water column)
Contact configuration: Normally open (closes on draft)
Function: Proves inducer draft & vent flow before ignition
Fit: Direct OEM replacement — factory tubing port
Primary compatibility: Goodman/Amana AMVC951155DXBA furnace
OEM Part Number: 20197308

OEM vs. Generic

Pressure switches are calibrated to a precise trip point — the OEM Goodman -0.10" switch guarantees the exact set point your control board expects. A generic switch with even a slightly different rating causes nuisance lockouts or, dangerously, may prove draft when venting is actually blocked. Always match the set point stamped on the original; the OEM part removes any guesswork.

Installation Difficulty: Easy (2/5)

Roughly 15 minutes: cut power, note and disconnect the two spade terminals and the rubber sensing tube, unscrew the switch, and mount the replacement. Inspect the sensing tube for cracks or condensate and confirm a clean start-up cycle after installation.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman -.10" NO Pressure Sw...

$32.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman AMVC951155DXBA — 20197308?

Yes. This is the factory-specified OEM pressure switch for the Goodman AMVC951155DXBA — 20197308. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman AMVC951155DXBA — 20197308?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu