What are the specs for this Pressure Switch?

The correct replacement for Goodman model OEM Goodman -.10 in WC NO Pressure Switch AMVC950704CXAB — 20197308 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number OEM Goodman -.10 in WC NO Pressure Switch AMVC950704CXAB — 20197308.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman -.10 in WC NO Pressure Switch AMVC950704CXAB — 20197308

Name: OEM Goodman -.10 in WC NO Pressure Switch AMVC950704CXAB — 20197308
Brand: Goodman
SKU: GOODMAN-8746
Price: 32.95 USD
Availability: InStock

SKU: GOODMAN-8746 Brand: Goodman

$32.95 $42.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 20197308 Air Pressure Switch is a genuine OEM safety control calibrated at -.10 in. WC (normally open) for the Amana/Goodman AMVC950704CXAB modulating variable-speed furnace. It confirms proper inducer draft and venting before the ignition sequence is allowed to proceed, protecting the home from unsafe combustion and blocked-flue conditions. A drifting or stuck switch is a leading cause of no-heat calls and inducer lockout codes.

Specifications

OEM Part Number: 20197308
Set Point: -.10 in. WC (water column)
Configuration: Normally Open (NO)
Compatible Model: AMVC950704CXAB
Ports: Single-port draft-proving switch
Function: Proves inducer/venting before ignition

OEM vs. Generic

Genuine OEM guarantees the exact -.10" WC trip point, port size, and bracket footprint required by this furnace's control board. Generic switches with approximate set points frequently short-cycle or fail to prove draft, leaving the furnace locked out. For a code-correct, reliable repair, use the factory-specified switch.

Installation Difficulty

Easy (2/5) — About 15 minutes. Cut power, label and remove the two spade wire terminals, disconnect the rubber pressure tube, unscrew the mounting bracket, and reverse for the new switch. Verify the hose is free of condensate and seated fully. No calibration needed — the switch is factory-set.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman -.10 in WC NO Pressu...

$32.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman OEM Goodman -.10 in WC NO Pressure Switch AMVC950704CXAB — 20197308?

Yes. This is the factory-specified OEM pressure switch for the Goodman OEM Goodman -.10 in WC NO Pressure Switch AMVC950704CXAB — 20197308. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman OEM Goodman -.10 in WC NO Pressure Switch AMVC950704CXAB — 20197308?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu