What are the specs for this Pressure Switch?

The correct replacement for Goodman model GUN060-3 — B1370107 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GUN060-3 — B1370107.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman -1.4 in WC NO Pressure Switch for GUN060-3 — B1370107

Name: OEM Goodman -1.4 in WC NO Pressure Switch for GUN060-3 — B1370107
Brand: Goodman
SKU: GOODMAN-13123
Price: 24.95 USD
Availability: InStock

SKU: GOODMAN-13123 Brand: Goodman

$24.95 $32.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman B1370107 Air Pressure Switch is the genuine OEM safety switch for GUN060-3 gas furnaces, rated at -1.4 in. WC, normally open (NO). It verifies that the inducer/draft blower is producing adequate combustion airflow before the furnace allows ignition. If the switch fails or the vent is blocked, the furnace locks out on a pressure fault and will not light — a classic no-heat safety condition.

Specifications

OEM Part Number: B1370107
Compatible Model: Goodman GUN060-3 (gas furnace)
Set Point: -1.4 in. WC (water column)
Contact Configuration: Normally Open (NO)
Function: Proves inducer/combustion draft before ignition

OEM vs. Generic

The genuine Goodman OEM switch is calibrated to the exact -1.4 in. WC trip point your furnace's control sequence requires. Substituting a generic switch with a different set point can cause nuisance lockouts or, worse, allow ignition without proper venting. Because this is a combustion safety device, OEM calibration is essential.

Installation Difficulty

Rating: Easy. Typically 15–20 minutes. Shut off furnace power, disconnect the two spade terminals, remove the tubing from the port, and unscrew the switch from its bracket. Reverse to install, making sure the pressure tube seats fully without kinks. Confirm the furnace fires normally after replacement.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman -1.4 in WC NO Pressu...

$24.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman GUN060-3 — B1370107?

Yes. This is the factory-specified OEM pressure switch for the Goodman GUN060-3 — B1370107. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman GUN060-3 — B1370107?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu