What are the specs for this Pressure Switch?

The correct replacement for Goodman model AKSS920453BXAA — 0130F00001P is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AKSS920453BXAA — 0130F00001P.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman -1.2" WC Pressure Switch for AKSS920453BXAA — 0130F00001P

Name: OEM Goodman -1.2" WC Pressure Switch for AKSS920453BXAA — 0130F00001P
Brand: Goodman
SKU: GOODMAN-3703
Price: 42.95 USD
Availability: InStock

SKU: GOODMAN-3703 Brand: Goodman

$42.95 $56.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00001P Pressure Switch is a genuine OEM combustion air-proving safety switch rated at -1.2" water column (WC), wired normally open (NO), for AKSS920453BXAA gas furnaces and compatible Goodman/Amana models. It senses negative pressure from the inducer draft blower and closes to confirm proper venting before the ignition sequence begins. If draft is insufficient—due to a blocked flue, failing inducer, or clogged condensate drain—the switch stays open and prevents ignition, protecting your home from unsafe combustion.

Specifications

OEM Part Number: 0130F00001P
Trip Point: -1.2" WC (water column)
Contact Configuration: Normally Open (NO)
Type: Draft / air-proving safety pressure switch
Fits: Goodman AKSS920453BXAA and compatible furnaces
Equipment: Gas Furnace

OEM vs. Generic

Pressure switch calibration is safety-critical. The genuine OEM 0130F00001P is factory-set to the exact -1.2" WC trip point your furnace requires. A generic switch with a different set point can cause hard lockouts or, worse, allow ignition under poor draft conditions. Always match the OEM rating stamped on the original switch.

Installation Difficulty

Easy to Moderate. About 15–20 minutes. Cut power, note and transfer the wire terminals, disconnect the rubber sensing hose, unscrew the old switch, mount the replacement, and reconnect the hose and wiring. Confirm the switch closes and the furnace runs a full heat cycle.

Restore safe, reliable ignition with a genuine Goodman pressure switch.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman -1.2" WC Pressure Sw...

$42.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman AKSS920453BXAA — 0130F00001P?

Yes. This is the factory-specified OEM pressure switch for the Goodman AKSS920453BXAA — 0130F00001P. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman AKSS920453BXAA — 0130F00001P?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu