What are the specs for this Pressure Switch?

The correct replacement for Goodman model GMH950904CXAG — 0130F00001P is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMH950904CXAG — 0130F00001P.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman -1.2" NO Pressure Switch for GMH950904CXAG — 0130F00001P

Name: OEM Goodman -1.2" NO Pressure Switch for GMH950904CXAG — 0130F00001P
Brand: Goodman
SKU: GOODMAN-11373
Price: 31.95 USD
Availability: InStock

SKU: GOODMAN-11373 Brand: Goodman

$31.95 $41.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00001P Pressure Switch (-1.2" NO)

The Goodman 0130F00001P is a factory-original air-proving pressure switch calibrated at -1.2 in. w.c., normally open (NO), for the GMH950904CXAG high-efficiency gas furnace. This safety switch confirms the induced-draft blower has established proper venting before the control board allows ignition. A weak diaphragm or out-of-spec setpoint is a leading cause of intermittent no-heat calls, ignition lockouts, and Code 12/13-style pressure faults.

Specifications

Part number: 0130F00001P
Set point: -1.2 in. w.c. (inches water column)
Configuration: Normally Open (NO)
Compatible model: GMH950904CXAG (and related GMH95 series)
Function: Proves induced-draft airflow / venting
Equipment: High-efficiency gas furnace

OEM vs. Generic

The genuine Goodman 0130F00001P is factory-calibrated to the exact -1.2" setpoint and uses the correct port orientation and terminal layout for the GMH95 board. Generic switches with a nearby-but-different setpoint cause the furnace to trip early or fail to prove draft — the classic short-cycling and lockout complaints. On a safety device, matching the exact OEM calibration is critical.

Installation

Difficulty: Easy–Moderate (2/5). Power down the furnace, photograph and transfer the wiring and hose to the new switch, then mount it in the original orientation. Confirm the sensing hose is clear and correctly routed. On restart, verify the switch closes and the burner lights. Typical time: 20–30 minutes. Never bypass or jumper a pressure switch — it is a safety control.

Ships with tracking and a fit guarantee for the listed model.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman -1.2" NO Pressure Sw...

$31.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman GMH950904CXAG — 0130F00001P?

Yes. This is the factory-specified OEM pressure switch for the Goodman GMH950904CXAG — 0130F00001P. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman GMH950904CXAG — 0130F00001P?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu