What are the specs for this Pressure Switch?

The correct replacement for Goodman model GMH950905DXAD — 0130F00000P is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMH950905DXAD — 0130F00000P.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman -1.10" Pressure Switch for GMH950905DXAD — 0130F00000P

Name: OEM Goodman -1.10" Pressure Switch for GMH950905DXAD — 0130F00000P
Brand: Goodman
SKU: GOODMAN-11457
Price: 49.95 USD
Availability: InStock

SKU: GOODMAN-11457 Brand: Goodman

$49.95 $64.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00000P Pressure Switch (-1.10" WC)

Ensure safe combustion airflow with this genuine OEM Goodman 0130F00000P pressure switch, calibrated at -1.10 inches water column and identified by its Sun Gold housing. Designed for the GMH950905DXAD furnace, this switch proves that the induced-draft blower is pulling adequate draft before the ignition sequence begins. If venting is blocked or the inducer is weak, the switch prevents the burners from firing — a critical safety interlock against incomplete combustion and CO buildup.

Part number: 0130F00000P
Trip point: -1.10 in. WC (negative pressure)
Color code: Sun Gold
Function: Draft / airflow proving safety switch
Fits: Goodman GMH950905DXAD

OEM vs. Generic

Pressure switches must match the furnace's exact set point — a generic switch with the wrong WC rating either nuisance-trips on good drafts or, worse, fails to trip when venting is dangerously restricted. This OEM switch is factory-calibrated to the -1.10" spec, guaranteeing the safety logic works as engineered.

Install Difficulty: Easy (2/5)

A 15–20 minute swap. Disconnect power, photograph the wiring, transfer the two spade terminals and the rubber sensing hose to the new switch, then mount it in the original bracket. Confirm the hose is free of condensate and firmly seated. Restart and watch a full ignition cycle to verify the switch closes on a call for heat. No calibration needed.

Genuine Goodman safety component — exact fit for the GMH950905DXAD.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman -1.10" Pressure Swit...

$49.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman GMH950905DXAD — 0130F00000P?

Yes. This is the factory-specified OEM pressure switch for the Goodman GMH950905DXAD — 0130F00000P. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman GMH950905DXAD — 0130F00000P?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu