What are the specs for this Pressure Switch?

The correct replacement for Goodman model ACSH960453BXAA — 0130F00069 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACSH960453BXAA — 0130F00069.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Goodman

OEM Goodman -0.95" NO Pressure Switch for ACSH960453BXAA — 0130F00069

Name: OEM Goodman -0.95" NO Pressure Switch for ACSH960453BXAA — 0130F00069
Brand: Goodman
SKU: 0130F00069-GEN
Price: 31.14 USD
Availability: InStock

SKU: 0130F00069-GEN Brand: Goodman

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00069 pressure switch is a genuine OEM draft-proving control for the Goodman ACSH960453BXAA high-efficiency gas furnace. Rated at -.95 inches of water column, normally open (NO), it verifies that the inducer motor is creating adequate draft before the ignition sequence is allowed to proceed. If the switch does not close — due to a weak inducer, a blocked flue or condensate trap, or a cracked hose — the control board blocks ignition to prevent unsafe combustion, often showing a pressure-switch fault code.

Specifications

OEM Part Number: 0130F00069
Part Type: Air pressure / draft switch
Set Point: -.95 in. w.c.
Configuration: Normally Open (NO)
Brand: Goodman (Genuine OEM)
Equipment: Gas Furnace
Compatible Model: ACSH960453BXAA

OEM vs. Generic

Pressure switches must match the furnace's exact set point and NO/NC configuration. This genuine Goodman OEM switch is factory-calibrated to -.95" w.c. NO, so it proves draft at the pressure your furnace expects. A mismatched generic switch can cause false lockouts or, dangerously, allow firing without proper draft. OEM is the safe, reliable choice.

Installation Difficulty

Moderate (3 of 5). Power down the furnace, photograph the hose routing, transfer the wires and tubing to the new switch, and confirm the hose is free of cracks or moisture. Verify the set point printed on the switch matches -.95". If lockouts persist, have a licensed HVAC technician check the inducer and venting.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman -0.95" NO Pressure S...

$31.14

Frequently Asked Questions

Does this Pressure Switch fit my Goodman ACSH960453BXAA — 0130F00069?

Yes. This is the factory-specified OEM pressure switch for the Goodman ACSH960453BXAA — 0130F00069. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman ACSH960453BXAA — 0130F00069?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu