What are the specs for this Pressure Switch?

The correct replacement for Goodman model OEM Goodman -0.40" NO Pressure Switch GMPV100-3 — B1370126 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number OEM Goodman -0.40" NO Pressure Switch GMPV100-3 — B1370126.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman -0.40" NO Pressure Switch GMPV100-3 — B1370126

Name: OEM Goodman -0.40" NO Pressure Switch GMPV100-3 — B1370126
Brand: Goodman
SKU: GOODMAN-12149
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-12149 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman B1370126 Pressure Switch is a genuine OEM draft-proving control for the GMPV100-3 furnace and compatible Goodman/Amana models. Rated at -0.40" WC (water column) and normally open (NO), this switch verifies that the induced-draft blower is producing adequate negative pressure before the control board allows ignition — a key safety interlock that prevents firing without proper venting.

Specifications

OEM Part Number: B1370126
Part Type: Air Pressure / Draft Switch
Set Point: -0.40" WC (water column)
Contact Configuration: Normally Open (NO)
Brand: Goodman
Equipment: Gas Furnace
Primary Fit: GMPV100-3

Symptoms of a Bad Pressure Switch

Furnace inducer runs but burners never light, ignition lockout, or a pressure-switch fault code. Note that a blocked flue, disconnected hose, or condensate blockage can also open the switch — inspect venting and tubing before replacing.

OEM vs. Generic

The OEM Goodman B1370126 matches the exact -0.40" WC set point and NO configuration your furnace requires; even small deviations in the set point cause nuisance faults. A generic equivalent can work if it matches the pressure rating and contact type precisely. For this safety interlock, OEM is the recommended choice.

Installation Difficulty: Easy

Cut power, note wire and hose positions, remove one or two screws, and transfer the tubing and terminals to the new switch. Estimated time: 15–20 minutes. A DIY-friendly repair once venting issues are ruled out.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman -0.40" NO Pressure S...

$26.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman OEM Goodman -0.40" NO Pressure Switch GMPV100-3 — B1370126?

Yes. This is the factory-specified OEM pressure switch for the Goodman OEM Goodman -0.40" NO Pressure Switch GMPV100-3 — B1370126. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman OEM Goodman -0.40" NO Pressure Switch GMPV100-3 — B1370126?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu