What are the specs for this Gas Orifice?

The correct replacement for Goodman model AMH80803BNBC — 10716005 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80803BNBC — 10716005.

What symptoms indicate I need a new gas orifice?

Common symptoms that indicate you need a new gas orifice include unusual noises, intermittent operation, complete failure to operate, or visible damage. For specific diagnostic guidance, visit nationalhvacparts.com/pages/hvac-diagnostic.

Is this gas orifice compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Natural Gas Orifice for AMH80803BNBC — 10716005

Name: OEM Goodman Natural Gas Orifice for AMH80803BNBC — 10716005
Brand: Goodman
SKU: GOODMAN-5444
Price: 7.96 USD
Availability: InStock

SKU: GOODMAN-5444 Brand: Goodman

$7.96 $10.49

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

This OEM Goodman 10716005 natural gas orifice is a genuine precision-drilled burner spud for the Amana/Goodman AMH80803BNBC gas furnace. The orifice meters the exact volume of natural gas fed into each in-shot burner, setting the gas-air ratio that determines BTU input and flame quality. A worn, oversized, or debris-clogged orifice throws off firing rate, causing sooting, lazy flames, or insufficient heat.

Specifications

Fuel: natural gas (drilled for NG input, not LP)
Type: threaded burner orifice / spud
Function: meters gas flow to a single in-shot burner
Fits: Amana & Goodman AMH80803BNBC furnaces
OEM Part Number: 10716005

OEM vs. Generic

Orifice bore diameter is calculated for this furnace's manifold pressure and rated input — even a few thousandths of an inch changes the firing rate. The OEM 10716005 is drilled to the factory specification for safe, efficient combustion. Generic or re-drilled orifices risk over- or under-firing the heat exchanger. Never substitute an LP orifice on a natural gas furnace; use the correct genuine part.

Install Difficulty: Moderate

Roughly 20–30 minutes. Shut off gas and power, remove the burner panel, and unthread the old orifice from the manifold with a properly sized nut driver — avoid distorting the brass. Thread the new orifice in snugly without over-tightening, reassemble, and leak-check the manifold. Verify manifold pressure and clean blue flames on the next heat cycle.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Natural Gas Orifice ...

$7.96

Frequently Asked Questions

Does this Gas Orifice fit my Goodman AMH80803BNBC — 10716005?

Yes. This is the factory-specified OEM gas orifice for the Goodman AMH80803BNBC — 10716005. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the gas orifice on my Goodman AMH80803BNBC — 10716005?

Refer to your equipment service manual for model-specific steps. General approach: turn off power, photograph connections, remove old part, install new part, restore power and test. For gas components, hire a licensed technician. Email info@nationalhvacparts.com for guidance.

What symptoms mean I need a new gas orifice?

Common symptoms: unusual noises, intermittent operation, complete failure, or visible damage. Visit our diagnostic hub for symptom-based troubleshooting.

Is this gas orifice compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman gas orifice?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu