OEM Goodman Condenser Fan Motor for WPH4330AHAA Heat Pump — 11091202S

The Goodman 11091202S is a genuine OEM fan/blower motor built for the WPH4330AHAA packaged heat pump. When the outdoor unit runs but the fan won't turn, hums, cycles on the internal overload, or spins slowly, a failing motor is the usual cause. This factory-matched replacement restores correct airflow across the coil so the system can reject heat properly and hold its rated capacity. Because it is the exact OEM motor, the shaft size, rotation, mounting bracket, and electrical connections line up with the original — no adapter kits or rewiring.

Specifications

• Application: WPH4330AHAA packaged heat pump fan/blower motor
• Type: OEM direct-replacement motor with factory mounting pattern
• Rotation, shaft diameter, and HP: match to your unit nameplate before installing
• Includes motor only — reuse or replace the run capacitor as needed
• OEM part number: 11091202S

OEM vs. Generic

A universal replacement motor can approximate horsepower and voltage, but you often have to swap the mounting bracket, match rotation manually, and re-pin the wiring — and a mismatched capacitor pairing shortens motor life. The OEM 11091202S is pre-matched to the WPH4330AHAA, giving you correct torque, airflow, and a plug-and-play install that protects any remaining unit warranty.

Installation Difficulty

Moderate (3/5). Requires basic electrical work. Disconnect power at the breaker and disconnect, discharge and note the capacitor wiring, remove the old motor and blade/bracket, transfer to the new motor, and reconnect per the wiring diagram. Verify capacitor rating and rotation. Typical time: 45–75 minutes. If you're not comfortable with line-voltage wiring, use a licensed HVAC technician.