OEM Goodman 10 x 8 in Blower Wheel for WGPH4560AMAB — D6723303S

Goodman D6723303S Blower Wheel (10" x 8")

The Goodman D6723303S is a genuine OEM 10 x 8 inch blower wheel (squirrel cage) built for the Goodman WGPH4560AMAB packaged unit and compatible Goodman/Amana air handlers. This factory-balanced, forward-curved wheel moves conditioned air across the heat exchanger and out through your ductwork. A cracked, rusted, or dirt-loaded wheel causes weak airflow, rattling, vibration, and uneven room temperatures — replacing it restores rated CFM and quiet operation.

Specifications

• Diameter x Width: 10 in x 8 in
• Type: Forward-curved double-inlet (DD) squirrel cage
• Material: Galvanized steel
• Balance: Factory dynamically balanced
• Rotation: Match original orientation on install
• Application: Indoor blower assembly

OEM vs. Generic

The OEM D6723303S arrives pre-balanced to Goodman's spec, so it spins true with no added vibration or premature bearing wear on the blower motor. Generic wheels often skip dynamic balancing, leading to noise and shortened motor life. For a long, quiet service life we recommend the OEM wheel.

Installation Difficulty: Moderate

Plan on 45–90 minutes. You will need to pull the blower assembly, loosen the set screw on the motor shaft, and slide the old wheel off — corroded shafts may require penetrating oil. Mark the wheel's depth on the shaft before removal so the new wheel sits centered in the housing, then torque the set screw onto the shaft flat. Cut all power first. Comfortable DIYers can handle it; otherwise call a technician.