What HP motor do I need for my ICP unit?

The correct replacement for ICP model WJH324000KTP0A2 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WJH324000KTP0A2 | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP X-13 ECM Motor Control Module 1/3 HP for WJH324000KTP0A2 | Ships Today

Name: ICP X-13 ECM Motor Control Module 1/3 HP for WJH324000KTP0A2 | Ships Today
Brand: ICP
SKU: 1185839
Price: 220.94 USD
Availability: InStock

SKU: 1185839 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM X-13 ECM motor control module (part #1185839) is the electronic controller that drives the constant-torque blower motor on your ICP/Heil/Tempstar WJH324000KTP0A2 air handler/heat pump. Rated at 1/3 HP, the X-13 platform delivers preset, programmed airflow torque taps for quiet, efficient blower operation that standard PSC motors can't match. The control takes 24V tap signals from the board and converts them to the correct motor torque. When the control module fails, the blower may run at the wrong speed, surge, fail to start, or stop entirely — even though the motor itself is mechanically fine.

Specifications

Spec	Value
Part Number	1185839
Type	ECM X-13 Motor Control Module
Brand	ICP / Heil / Tempstar
Horsepower	1/3 HP
Motor Platform	Constant-Torque ECM (X-13)
Control Input	24V torque taps

Compatibility

Designed for the ICP/Heil/Tempstar/Comfortmaker WJH324000KTP0A2 and other Carrier-family air handlers and heat pumps using the 1/3 HP X-13 ECM blower platform. Match the horsepower and connector/tap configuration to your existing control before installing.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage at the blower compartment with a multimeter; allow capacitors to discharge.
Access — Remove the blower/air-handler service panel.
Document — Photograph the power connector, ground, and 24V torque-tap wiring before disconnecting.
Remove — Unplug the connectors and detach the control module from the motor.
Install — Mount the new module, reseat the harness and torque-tap leads exactly per your photo, and confirm a solid ground.
Test — Restore power, call for fan/heat/cool, and verify the blower ramps to the correct programmed speed.

Signs You Need a Replacement

Blower won't start while the motor spins freely by hand
Wrong, surging, or hunting blower speed
Intermittent operation or unexpected shutdowns
No airflow despite a confirmed call for fan from the control board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP X-13 ECM Motor Control Modul...

$220.94

Frequently Asked Questions

Does this Fan Motor fit my ICP WJH324000KTP0A2 | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WJH324000KTP0A2 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WJH324000KTP0A2 | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu