What HP motor do I need for my ICP unit?

The correct replacement for ICP model WJA330000K000A2 — 1/3 HP | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WJA330000K000A2 — 1/3 HP | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP X-13 ECM Fan Motor Control for WJA330000K000A2 — 1/3 HP | Ships Today

Name: ICP X-13 ECM Fan Motor Control for WJA330000K000A2 — 1/3 HP | Ships Today
Brand: ICP
SKU: 1185840
Price: 258.70 USD
Availability: InStock

SKU: 1185840 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM X-13 ECM motor control drives the indoor blower on your ICP / Heil / Tempstar WJA330000K000A2 air handler / furnace. Rated at 1/3 HP, the X-13 is a constant-torque electronically commutated motor that holds a programmed airflow across a range of static pressures, running far more efficiently and quietly than a standard PSC motor. The integrated motor control receives low-voltage tap signals from the control board to select the proper speed for heating, cooling, and continuous fan. When an ECM motor or its control module fails, the blower may not start, may surge or hunt for speed, or may throw an airflow-related lockout on the control board. Replacing it with the matched OEM X-13 control restores correct, efficient blower operation.

Specifications

Spec	Value
Part Number	1185840
Type	X-13 ECM Motor Control (Constant Torque)
Brand	ICP / Heil / Tempstar
Horsepower	1/3 HP
Application	Indoor Blower / Air Handler
Fit	OEM Replacement

Compatibility

Built for the ICP / Heil / Tempstar / Comfortmaker WJA330000K000A2 model and related blower assemblies using a 1/3 HP X-13 ECM control. Confirm horsepower, frame, and shaft/programming against the original motor before installing.

Installation Guide

Safety First — Disconnect power at the breaker, then verify zero voltage with a multimeter.
Access — Remove the blower-compartment service panel and slide out the blower assembly if needed.
Document — Photograph the line-voltage harness and the low-voltage speed-tap plug before disconnecting.
Remove — Disconnect the harnesses, loosen the blower-wheel set screw, and unbolt the motor from the housing.
Install — Mount the new motor, reinstall the blower wheel square on the shaft, and reconnect both harnesses per your photo.
Test — Restore power and confirm the blower ramps to the correct speed on heat, cool, and fan calls.

Signs You Need a Replacement

Blower won't start or only hums.
Motor surges, hunts, or runs at the wrong speed.
Control board reports an airflow or motor-communication fault.
Overheating, bearing noise, or burnt smell from the motor.

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP X-13 ECM Fan Motor Control f...

$258.70

Frequently Asked Questions

Does this Fan Motor fit my ICP WJA330000K000A2 — 1/3 HP | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WJA330000K000A2 — 1/3 HP | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WJA330000K000A2 — 1/3 HP | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu