What are the specs for this Control Board?

The correct replacement for ICP model WTA3302000RKA1 — ECM Motor Module | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WTA3302000RKA1 — ECM Motor Module | Ships Today.

ICP

ICP X-13 Control Board for WTA3302000RKA1 — ECM Motor Module | Ships Today

Name: ICP X-13 Control Board for WTA3302000RKA1 — ECM Motor Module | Ships Today
Brand: ICP
SKU: WTA3302000RKA1
Price: 214.44 USD
Availability: InStock

SKU: WTA3302000RKA1 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ICP X-13 circuit board (part number 1173692) is the ECM motor control module for the ICP/Tempstar/Heil WTA3302000RKA1 system. The X-13 board is the brain that drives the constant-torque ECM blower motor, interpreting the thermostat and equipment inputs and commanding the correct motor speed tap for heating, cooling, and continuous-fan operation. Because it carries both control logic and motor signaling, a failed X-13 board can leave the blower dead, stuck on one speed, or short-cycling. Failures typically come from voltage surges, lightning, moisture, or overheating, and often show up as burnt traces, swollen capacitors, or scorched relays on the board itself. Swapping the board restores proper airflow staging without replacing the entire motor assembly.

Specifications

Spec	Value
Part Number	1173692
Type	X-13 ECM Motor Control Board
Brand	ICP (Tempstar / Heil / Comfortmaker)
Function	Constant-Torque ECM Blower Control
Fits Model	WTA3302000RKA1

Compatibility

Direct OEM fit for the ICP/Tempstar/Heil WTA3302000RKA1 system and comparable ICP-family equipment that uses the X-13 ECM control module. Verify the part number (1173692) and connector layout against your existing board before installing.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter before opening the control area.
Access — Remove the blower compartment / control service panel.
Document — Photograph every harness, motor, and low-voltage connection on the board before unplugging.
Remove — Unplug each connector, release the board standoffs or mounting screws, and lift out the old X-13 board.
Install — Seat the new board on its standoffs and reconnect every harness to the matching plug per your photo, confirming the motor connector is fully latched.
Test — Restore power and verify the blower starts and ramps to the correct speed on heat, cool, and fan-only calls.

Signs You Need a Replacement

Blower motor doesn't run on any call for heat, cool, or fan.
Motor stuck at one speed or running at the wrong airflow stage.
Visible burnt traces, scorched relays, or bulged capacitors on the board.
Intermittent blower operation or no response to thermostat changes after surge or storm.

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP X-13 Control Board for WTA33...

$214.44

Frequently Asked Questions

Does this Control Board fit my ICP WTA3302000RKA1 — ECM Motor Module | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WTA3302000RKA1 — ECM Motor Module | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WTA3302000RKA1 — ECM Motor Module | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu