Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP Transformer for WAXM604A1 — 40VA 208/230V to 24V | Ships Today
ICP

ICP Transformer for WAXM604A1 — 40VA 208/230V to 24V | Ships Today

SKU: 1172028 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM control transformer (part number 1172028) is the 24V power source for the ICP WAXM604A1 air handler. It steps down the incoming 208/230V line voltage to the 24V low-voltage power required by the thermostat, control board, contactor coils, and safety circuits. Rated at 40VA, it supplies enough current to drive the typical low-voltage load of the unit. When a transformer fails, the entire low-voltage control system goes dead: the thermostat screen blanks, the blower and compressor will not energize, and no 24V is present across the R and C terminals. Failures are usually caused by a shorted control wire, a seized contactor coil, or age-related insulation breakdown that opens the internal thermal fuse.

Specifications

Spec Value
Part Number 1172028
Type Class 2 Step-Down Control Transformer
Brand ICP
Primary Voltage 208/230V
Secondary Voltage 24V
Rating 40VA
Fitment OEM Replacement

Compatibility

Direct OEM fit for the ICP WAXM604A1 and compatible Tempstar and Heil air handlers using the 1172028 transformer. Always confirm the primary voltage matches your unit's incoming supply (208/230V) before installing.

Installation Guide

  1. Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter at the unit's line terminals.
  2. Access — Remove the service panel to expose the control board and transformer.
  3. Document — Photograph all primary and secondary wire connections before disconnecting anything.
  4. Remove — Disconnect the line-voltage primary leads and the 24V secondary leads, then unbolt the transformer from its bracket.
  5. Install — Mount the new transformer, reconnect primary to the matching 208/230V tap and secondary to the 24V circuit per your photos.
  6. Test — Restore power and confirm 24V across the R and C terminals; verify the thermostat powers up and the unit responds to a call for heat or cool.

Signs You Need a Replacement

  • No 24V output at the secondary terminals while line voltage is present.
  • Dead thermostat and no response from blower or compressor.
  • Burnt smell or visibly scorched transformer housing.
  • Repeated control-fuse blowouts traced back to the transformer.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Transformer fit my ICP WAXM604A1 — 40VA 208/230V to 24V | Ships Today?
Yes. This is the factory-specified OEM transformer for the ICP WAXM604A1 — 40VA 208/230V to 24V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the transformer on my ICP WAXM604A1 — 40VA 208/230V to 24V | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Photo wiring connections. Step 3: Disconnect wires from old transformer. Step 4: Remove mounting hardware. Step 5: Install new transformer, reconnect wires matching voltage ratings. Step 6: Verify 24V output with multimeter.
My thermostat has no power. What failed?
Thermostat with no display = failed 24V transformer (or blown control board fuse). Check the 3A/5A fuse on the control board first ($1–$5 fix). If fuse is good but no 24V output from transformer, replace transformer.
Is this transformer compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP transformer?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online