ICP Thermostat for YH030GC — VariTech Single-Stage 24V Control | Ships Today

Overview

This is a genuine OEM ICP VariTech single-stage thermostat (part number 1064095) for the YH030GC heat pump. The thermostat senses indoor temperature and signals the air handler, condenser, and reversing valve over the 24-volt control circuit to call for heating or cooling. When it fails, the system may short cycle, ignore setpoint changes, lose its display, or stop calling entirely. Installing the correct OEM control restores accurate sensing and reliable heat-pump staging.

Specifications

Compatibility

Designed as the factory thermostat for the ICP/Heil/Tempstar/Comfortmaker YH030GC heat pump and shared VariTech-platform models. Confirm the OEM part number against your existing control before ordering.

Installation Guide

1. Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter before touching any wiring.
2. Access — Remove the existing thermostat from its wall plate or sub-base.
3. Document — Photograph every wire and terminal label (R, C, Y, W, O/B, G) before disconnecting.
4. Remove — Release the old thermostat and label each conductor.
5. Install — Mount the new VariTech control and reconnect each wire to the matching terminal per your photo.
6. Test — Restore power, set a heat and a cool call, and confirm the system stages and the reversing valve responds.

Signs You Need a Replacement

• Blank or frozen display, or no power to the control.
• System ignores setpoint changes or won't switch between heat and cool.
• Short cycling or erratic temperature readings.
• No 24V call reaching the condenser or reversing valve.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.