What igniter fits my ICP furnace?

The correct replacement for ICP model RGS180STCA0AAAA — OEM 1184216 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS180STCA0AAAA — OEM 1184216 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Spark Igniter for RGS180STCA0AAAA — OEM 1184216 | Ships Today

Name: ICP Spark Igniter for RGS180STCA0AAAA — OEM 1184216 | Ships Today
Brand: ICP
SKU: 1184216
Price: 45.44 USD
Availability: InStock

SKU: 1184216 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM spark igniter (sparker), part number 1184216, for the ICP / Tempstar / Heil RGS180STCA0AAAA gas furnace. The spark igniter generates a high-voltage arc at the burner to light the gas at the start of each heat cycle. Unlike a hot-surface igniter that glows, a spark igniter fires a rapid spark across an electrode gap. A cracked ceramic insulator, eroded electrode tip, or incorrect gap leads to failed ignition, repeated lockouts, delayed light-off with a small rollout, or a furnace that runs the inducer but never establishes flame.

Specifications

Spec	Value
Part Number	1184216
Type	Spark Igniter / Sparker
Brand	ICP / Tempstar / Heil
Ignition Style	Direct spark
Application	Gas burner ignition

Compatibility

Designed for the ICP Tempstar Heil RGS180STCA0AAAA furnace and related spark-ignition RGS models. Confirm the electrode/bracket style and the printed part number on your existing igniter before ordering.

Installation Guide

Safety First — Shut off gas, disconnect electrical power, and verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position, electrode gap, and wire routing.
Remove — Disconnect the high-voltage lead and unscrew the old igniter from the burner bracket; handle the ceramic by its body only.
Install — Mount the new igniter, set the gap per the burner spec, and reconnect the ignition lead.
Test — Restore gas and power, then start a heat call and confirm the spark lights the burner promptly and consistently.

Signs You Need a Replacement

Repeated ignition lockouts or no-heat calls
Audible sparking with no flame established
Cracked ceramic insulator or eroded electrode tip
Delayed light-off or a small flame rollout at startup

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Spark Igniter for RGS180STCA...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS180STCA0AAAA — OEM 1184216 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS180STCA0AAAA — OEM 1184216 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS180STCA0AAAA — OEM 1184216 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu