What igniter fits my ICP furnace?

The correct replacement for ICP model RGS180LEEA0AAAA — OEM Part 1184216 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS180LEEA0AAAA — OEM Part 1184216 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Spark Igniter for RGS180LEEA0AAAA — OEM Part 1184216 | Ships Today

Name: ICP Spark Igniter for RGS180LEEA0AAAA — OEM Part 1184216 | Ships Today
Brand: ICP
SKU: 1184216
Price: 38.94 USD
Availability: InStock

SKU: 1184216 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The OEM Spark Igniter (part number 1184216) is the ignition electrode that generates the high-voltage spark to light the burners in your ICP / Tempstar / Heil RGS180LEEA0AAAA furnace. On each call for heat, the control board energizes the igniter and it arcs across a precise electrode gap to ignite the gas at the burner. Spark igniters degrade as the electrode tip erodes, the ceramic insulator cracks, or the gap drifts out of specification, leading to weak or no spark. Symptoms include the furnace failing to light, repeated ignition lockouts, clicking with no flame, or delayed ignition with a small pop. Replacing the igniter with the genuine OEM part restores reliable, on-demand ignition.

Specifications

Spec	Value
Part Number	1184216
Description	Ignitor, Sparker
Type	Spark / Direct-Spark Igniter
Brand	ICP (Tempstar / Heil)
Insulator	Ceramic
Fitment	OEM Direct Replacement

Compatibility

This spark igniter is a direct OEM fit for the ICP / Tempstar / Heil RGS180LEEA0AAAA gas furnace and the related RGS-series burner platform that uses spark ignition. Verify your furnace uses a spark (not hot-surface) igniter before ordering.

Installation Guide

Safety First — Shut off the gas supply and disconnect electrical power. Verify zero voltage with a multimeter before working.
Access — Remove the furnace service panel to reach the burner assembly and igniter.
Document — Photograph the igniter position, gap orientation, and ignition wire routing.
Remove — Disconnect the ignition lead and unfasten the old igniter from the burner bracket, handling the ceramic carefully.
Install — Mount the new igniter at the correct electrode gap and orientation, then reconnect the ignition lead.
Test — Restore gas and power, run a heat cycle, and confirm a strong spark and immediate, reliable burner ignition.

Signs You Need a Replacement

Furnace clicks but burners fail to light
Repeated ignition lockouts or failed start attempts
Cracked ceramic insulator or eroded electrode tip
Weak, intermittent, or no visible spark

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Spark Igniter for RGS180LEEA...

$38.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS180LEEA0AAAA — OEM Part 1184216 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS180LEEA0AAAA — OEM Part 1184216 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS180LEEA0AAAA — OEM Part 1184216 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu