What igniter fits my ICP furnace?

The correct replacement for ICP model RGS180LDAA0AAAA — OEM 1184216 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS180LDAA0AAAA — OEM 1184216 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Spark Igniter for RGS180LDAA0AAAA — OEM 1184216 | Ships Today

Name: ICP Spark Igniter for RGS180LDAA0AAAA — OEM 1184216 | Ships Today
Brand: ICP
SKU: 1184216
Price: 49.34 USD
Availability: InStock

SKU: 1184216 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM spark igniter (part number 1184216) for the ICP Tempstar Heil RGS180LDAA0AAAA gas furnace. The spark igniter (sparker) creates the high-voltage arc that lights the burner gas during the ignition sequence. On each heat call, the control board energizes the igniter, which sparks across its electrode gap to ignite the gas at the burner. Over time the electrode erodes, cracks, or fouls with corrosion, leading to weak or no spark, delayed ignition, or repeated ignition lockouts. Replacing the igniter with the correct OEM sparker restores fast, reliable lights and eliminates hard-start and no-heat conditions caused by a worn electrode.

Specifications

Spec	Value
Part Number	1184216
Description	Spark Igniter / Sparker
Type	Direct Spark Igniter
Brand	ICP (Tempstar / Heil / Comfortmaker)
Fitment	OEM Direct Replacement
Application	Gas Furnace Burner Ignition

Compatibility

Direct fit for the ICP Tempstar Heil RGS180LDAA0AAAA and shared-platform furnaces using the 1184216 spark igniter. Match the original part number and electrode geometry before ordering.

Installation Guide

Safety First — Shut off gas, disconnect power, and verify zero voltage with a multimeter. The igniter carries high voltage during operation.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position, electrode gap, and ignition wire routing.
Remove — Disconnect the high-voltage ignition lead, unscrew the igniter mounting bracket, and withdraw the old sparker.
Install — Mount the new igniter at the factory gap and position, then reconnect the ignition lead.
Test — Restore gas and power, initiate a heat call, and confirm a strong spark and immediate burner ignition.

Signs You Need a Replacement

Weak, intermittent, or no spark at the burner
Delayed ignition or rough "whoosh" on light-off
Repeated ignition lockouts or no-heat calls
Cracked ceramic, eroded electrode, or carbon fouling on the sparker

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Spark Igniter for RGS180LDAA...

$49.34

Frequently Asked Questions

Does this Igniter fit my ICP RGS180LDAA0AAAA — OEM 1184216 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS180LDAA0AAAA — OEM 1184216 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS180LDAA0AAAA — OEM 1184216 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu