What igniter fits my ICP furnace?

The correct replacement for ICP model RGS180HDAA0AAAA — Direct Spark Ignition | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS180HDAA0AAAA — Direct Spark Ignition | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Spark Igniter for RGS180HDAA0AAAA — Direct Spark Ignition | Ships Today

Name: ICP Spark Igniter for RGS180HDAA0AAAA — Direct Spark Ignition | Ships Today
Brand: ICP
SKU: 1184216
Price: 42.84 USD
Availability: InStock

SKU: 1184216 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM spark igniter (P/N 1184216) provides the ignition source for the ICP/Heil/Tempstar RGS180HDAA0AAAA gas furnace. Unlike a hot surface igniter, a spark igniter (sparker) generates a high-voltage spark across an electrode gap to light the burner gas on each heating cycle. Over time the electrode erodes, the ceramic insulator cracks, or carbon builds up, leading to weak or missing spark and repeated ignition lockouts. A fresh igniter restores reliable, fast light-off and clears intermittent no-heat calls.

Specifications

Spec	Value
Part Number	1184216
Type	Spark Igniter / Sparker
Ignition Method	Direct Spark
Brand	ICP / Heil / Tempstar / Comfortmaker
Application	Gas Furnace Burner Ignition

Compatibility

Built for the ICP RGS180HDAA0AAAA and the shared Heil, Tempstar, and Comfortmaker furnace platform that uses this ignition assembly. Match the part number to your existing igniter to confirm fitment.

Installation Guide

Safety First — Shut off gas and electrical power; verify zero voltage with a multimeter.
Access — Remove the burner compartment door.
Document — Photograph the igniter bracket position and lead routing.
Remove — Disconnect the ignition lead and unscrew the igniter from the burner assembly.
Install — Mount the new igniter at the correct gap, reconnect the lead per your photo.
Test — Restore gas and power, start a heat cycle, and confirm a strong, consistent spark and clean light-off.

Signs You Need a Replacement

Repeated ignition lockouts or no-heat calls
Weak, intermittent, or no visible spark
Cracked ceramic insulator or eroded electrode
Delayed ignition with a noticeable gas smell or rumble

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Spark Igniter for RGS180HDAA...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP RGS180HDAA0AAAA — Direct Spark Ignition | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS180HDAA0AAAA — Direct Spark Ignition | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS180HDAA0AAAA — Direct Spark Ignition | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu