What amp contactor do I need for my ICP system?

The correct replacement for ICP model WJA360000KTP0A2 — 1-Pole | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WJA360000KTP0A2 — 1-Pole | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP Single-Pole Contactor 40A 24V for WJA360000KTP0A2 — 1-Pole | Ships Today

Name: ICP Single-Pole Contactor 40A 24V for WJA360000KTP0A2 — 1-Pole | Ships Today
Brand: ICP
SKU: 1173690
Price: 38.94 USD
Availability: InStock

SKU: 1173690 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM single-pole contactor (part #1173690) is the genuine replacement for ICP/Tempstar/Heil model WJA360000KTP0A2. The contactor is the electrical switch that energizes the compressor and condenser fan whenever the thermostat calls for cooling. A 24-volt signal from the control transformer pulls in the 40-amp contacts, completing the high-voltage circuit to the outdoor unit. Over thousands of cycles the contacts pit, burn, and weld, or the coil burns out — leaving the unit either dead or unable to shut off. This 1-pole, 40A, 24V-coil contactor restores reliable switching.

Specifications

Spec	Value
Part Number	1173690
Type	Single-Pole (1-Pole)
Brand	ICP (Tempstar / Heil)
Contact Rating	40 Amp
Coil Voltage	24V
Poles	1

Compatibility

Directly fits ICP, Tempstar, Heil, Comfortmaker, and Arcoaire condensing units using OEM part 1173690, including model WJA360000KTP0A2. Verify your existing contactor is single-pole with a 24V coil and a 40A (or lower) contact rating before installing.

Installation Guide

Safety First — Disconnect power at the condenser disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the condenser service panel.
Document — Photograph all line, load, and 24V coil wires before disconnecting.
Remove — Transfer wires one at a time or label them, then unscrew the old contactor from the bracket.
Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
Test — Restore power and confirm the contactor pulls in on a cooling call and the unit runs.

Signs You Need a Replacement

Outdoor unit won't start even though the thermostat calls for cooling
Buzzing or chattering at the contactor
Burned, pitted, or welded contacts that won't open
Compressor runs continuously and won't shut off

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Single-Pole Contactor 40A 24...

$38.94

Frequently Asked Questions

Does this Contactor fit my ICP WJA360000KTP0A2 — 1-Pole | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP WJA360000KTP0A2 — 1-Pole | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP WJA360000KTP0A2 — 1-Pole | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu