What MFD capacitor do I need for my ICP AC?

The correct replacement for ICP model RGS213LEEA0AAAA — Oval | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS213LEEA0AAAA — Oval | Ships Today.

My AC hums but will not start. What part do I need?

An AC that hums but will not start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost needed to start the compressor and fan motors. When it fails, you hear the hum of the motor trying to start but it cannot overcome inertia. Other symptoms include the fan spinning slowly, the AC cycling on and off rapidly, or a visibly swollen or leaking capacitor. Replacement cost: $15 to $80 for the part, DIY in 30 minutes.

ICP

ICP Run Capacitor 7.5 MFD 370V for RGS213LEEA0AAAA — Oval | Ships Today

Name: ICP Run Capacitor 7.5 MFD 370V for RGS213LEEA0AAAA — Oval | Ships Today
Brand: ICP
SKU: 1176150
Price: 23.40 USD
Availability: InStock

SKU: 1176150 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM oval run capacitor (part number 1176150) is a 7.5 MFD, 370V single-run capacitor for the ICP / Heil / Tempstar RGS213LEEA0AAAA. The run capacitor provides the steady phase shift a single-phase motor needs to run efficiently — most commonly the condenser fan motor. A weak or failed capacitor causes the motor to hum without starting, run hot, draw high amps, or shut down on overload. This listing covers the capacitor and its mounting hardware: capacitor plate (1183001) and oval capacitor clamp (1171552) for a complete, secure install.

Specifications

Spec	Value
Capacitor Part Number	1176150
Capacitance	7.5 MFD
Voltage Rating	370V
Type	Single Run, Oval
Mounting Plate	1183001
Capacitor Clamp	1171552
Brand	ICP / Heil / Tempstar
Fits Model	RGS213LEEA0AAAA

Compatibility

Direct-fit replacement for the ICP/Heil/Tempstar RGS213LEEA0AAAA and Comfortmaker-family units originally equipped with the 7.5 MFD 370V OEM capacitor 1176150. Confirm microfarad and voltage rating against your existing capacitor label before ordering.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker. Verify zero voltage, then discharge the capacitor across its terminals with an insulated resistor.
Access — Remove the condensing unit's electrical service panel.
Document — Photograph the terminal wiring before disconnecting.
Remove — Pull the spade connectors, loosen the clamp, and remove the old capacitor.
Install — Secure the new capacitor with the plate and clamp, then reconnect the leads exactly as photographed.
Test — Restore power and confirm the fan motor starts and runs smoothly.

Signs You Need a Replacement

Fan motor hums but won't start or needs a push to spin.
Bulged, leaking, or domed capacitor top.
Measured capacitance out of the 7.5 MFD tolerance band.
Motor overheating or tripping on overload.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Run Capacitor 7.5 MFD 370V f...

$23.40

Frequently Asked Questions

Does this Capacitor fit my ICP RGS213LEEA0AAAA — Oval | Ships Today?

Yes. This is the factory-specified OEM capacitor for the ICP RGS213LEEA0AAAA — Oval | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the capacitor on my ICP RGS213LEEA0AAAA — Oval | Ships Today?

Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.

My AC hums but won’t start. What part do I need?

An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).

Is this capacitor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP capacitor?

OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu