What MFD capacitor do I need for my ICP AC?

The correct replacement for ICP model WFSR080C060A1 — Oval with Strap | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFSR080C060A1 — Oval with Strap | Ships Today.

My AC hums but will not start. What part do I need?

An AC that hums but will not start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost needed to start the compressor and fan motors. When it fails, you hear the hum of the motor trying to start but it cannot overcome inertia. Other symptoms include the fan spinning slowly, the AC cycling on and off rapidly, or a visibly swollen or leaking capacitor. Replacement cost: $15 to $80 for the part, DIY in 30 minutes.

ICP

ICP Run Capacitor 35 MFD 370V for WFSR080C060A1 — Oval with Strap | Ships Today

Name: ICP Run Capacitor 35 MFD 370V for WFSR080C060A1 — Oval with Strap | Ships Today
Brand: ICP
SKU: 1185806
Price: 31.20 USD
Availability: InStock

SKU: 1185806 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 35 MFD, 370-volt oval run capacitor (OEM 1184895 / 1185806) keeps the blower motor in your ICP WFSR080C060A1 furnace running smoothly by supplying the phase shift the motor needs to maintain torque. It ships with the OEM oval mounting strap (1014315). A weak or failed run capacitor causes hard starting, motor hum, overheating, and blower failure — leaving you with no airflow even when the furnace is calling.

Specifications

Spec	Value
Part Number	1184895 / 1185806
Mounting Strap	1014315 (oval)
Type	Single Run Capacitor
Capacitance	35 MFD
Voltage	370V
Shape	Oval
Brand	ICP / Heil / Tempstar
Fitment	OEM

Compatibility

Direct-fit replacement for the blower-motor run capacitor in the ICP/Heil/Tempstar WFSR080C060A1 furnace. Verify your existing capacitor reads 35 MFD / 370V before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter. Discharge the old capacitor across a resistor before touching the terminals.
Access — Remove the blower-compartment service panel.
Document — Photograph all wire positions before disconnecting.
Remove — Loosen the mounting strap, note terminal markings, and pull the leads off the old capacitor.
Install — Secure the new capacitor with the oval strap and reconnect each lead per your photo.
Test — Restore power and confirm the blower starts promptly and runs quietly.

Signs You Need a Replacement

Blower hums but won't start or starts slowly
Bulged, leaking, or visibly swollen capacitor can
Intermittent or weak airflow from the furnace
Capacitance reads well below 35 MFD on a meter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Run Capacitor 35 MFD 370V fo...

$31.20

Frequently Asked Questions

Does this Capacitor fit my ICP WFSR080C060A1 — Oval with Strap | Ships Today?

Yes. This is the factory-specified OEM capacitor for the ICP WFSR080C060A1 — Oval with Strap | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the capacitor on my ICP WFSR080C060A1 — Oval with Strap | Ships Today?

Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.

My AC hums but won’t start. What part do I need?

An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).

Is this capacitor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP capacitor?

OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu