ICP Run Capacitor 2.0 MFD for YG030GA2 — Round Fan Capacitor | Ships Today

Overview

This OEM 2.0 MFD round run capacitor (Part #1095021) supplies the steady phase-shifted current a motor needs to run smoothly and efficiently in your ICP unit. The kit includes the round mounting clamp to secure the capacitor in the control box. A weak or failed run capacitor is one of the most common HVAC failures — symptoms include a fan or motor that hums but won't start, a motor that runs hot and trips on overload, slow start-up, or a bulged/leaking capacitor can. Restoring the correct 2.0 MFD capacitance returns the motor to full torque and protects it from premature burnout.

Specifications

Compatibility

Direct OEM fit for ICP-family condensing units including model YG030GA2, and used across matching Tempstar, Heil, and Comfortmaker systems. Verify the 2.0 MFD rating and part number 1095021 stamped on your old capacitor before ordering.

Installation Guide

1. Safety First — Disconnect power and verify zero voltage with a multimeter; a capacitor can hold a dangerous charge, so discharge it across the terminals with an insulated resistor before touching.
2. Access — Remove the service panel to reach the control box.
3. Document — Photograph every wire and terminal before disconnecting.
4. Remove — Pull the spade connectors, loosen the round clamp, and remove the old capacitor.
5. Install — Secure the new capacitor in the clamp and reconnect the leads per your photo.
6. Test — Restore power and confirm the motor starts instantly and runs cool.

Signs You Need a Replacement

• Motor hums but won't spin up without a manual push.
• Bulged, swollen, or leaking capacitor top.
• Motor runs hot and trips on overload.
• Measured capacitance drifts below the 2.0 MFD rating.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.